root@mx104-1> monitor traffic interface ge-1/1/7.456 extensive no-resolve
Address resolution is OFF.
Listening on ge-1/1/7.456, capture size 1514 bytes
18:01:39.873306 Out
Juniper PCAP Flags [Ext], PCAP Extension(s) total length 22
Device Media Type Extension TLV #3, length 1, value: Ethernet (1)
Logical Interface Encapsulation Extension TLV #6, length 1, value: Ethernet (14)
Device Interface Index Extension TLV #1, length 2, value: 40960
Logical Interface Index Extension TLV #4, length 4, value: 340
Logical Unit Number Extension TLV #5, length 4, value: 456
-----original packet-----
0c:86:10:c6:5b:85 > 0c:86:10:c6:5b:86, ethertype 802.1Q (0x8100), length 102: vlan 456, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 426
48, offset 0, flags [none], proto: ICMP (1), length: 84) 192.168.56.15 > 192.168.56.18: ICMP echo request, id 10710, seq 0, length 64
18:01:39.873995 In
Juniper PCAP Flags [Ext, no-L2, In], PCAP Extension(s) total length 22
Device Media Type Extension TLV #3, length 1, value: Ethernet (1)
Logical Interface Encapsulation Extension TLV #6, length 1, value: Ethernet (14)
Device Interface Index Extension TLV #1, length 2, value: 40960
Logical Interface Index Extension TLV #4, length 4, value: 340
Logical Unit Number Extension TLV #5, length 4, value: 456
-----original packet-----
PFE proto 2 (ipv4): (tos 0x0, ttl 64, id 42651, offset 0, flags [none], proto: ICMP (1), length: 84) 192.168.56.18 > 192.168.56.15: I
CMP echo reply, id 10710, seq 0, length 64