Page Comparison

...

Add New DHCP server service

Host service

Network-interface > address

Add Host Services

DHCP server

Add Address Pool

PCLI

Code Block

title	dhcp

admin@node1.branch1# show config running authority router branch1 system

config authority router branch1 system ntp server 0.uk.pool.ntp.org ip-address  0.uk.pool.ntp.org


config

    authority

        router  branch1
            name    branch1

            system

                ntp

                    server  0.uk.pool.ntp.org
                        ip-address  0.uk.pool.ntp.org
                    exit
                exit
            exit
        exit
    exit
exit

Conductor

Operation: Router > Node > DHCP

Show commands

show dhcp

Code Block

title	show dhcp

admin@node1.branch1# show dhcp mappings node node1
Wed 2021-06-30 11:39:30 UTC

Retrieving from 'node1.branch1'...

================= ================== ====== ============== ================ =============
 Src Device Port   Dest Device Port   VLAN   Mapping Type   IP Family Type   Config Type
================= ================== ====== ============== ================ =============
               1                  0      0   originating    ipv4             client  <<<<<<<<<<<<< Allocated by the SSR
               3                250      0   originating    ipv4             server
             250                  3      0   derived        ipv4             server

Troubleshoot

show network-interface application

dhcp client or dhclient

Release and request

sudo dhclient -r eth0 && sudo dhclient eth0

Versions Compared

Old Version 5

New Version 6

Key

dhcp client or dhclient

Release and request