DHCP server on the Network-interface of SSR
https://docs.128technology.com/docs/config_dhcp/#basic-configuration
Add New DHCP server service | |
---|---|
Host service | Network-interface > address Add Host Services |
DHCP server | |
Add Address Pool | |
PCLI | NTP check IP@ instead dhcp admin@node1.branch1# show config running authority router branch1 system config authority router branch1 system ntp server 0.uk.pool.ntp.org ip-address 0.uk.pool.ntp.org config authority router branch1 name branch1 system ntp server 0.uk.pool.ntp.org ip-address 0.uk.pool.ntp.org exit exit exit exit exit exit |
Conductor | |
Operation: Router > Node > DHCPÂ | |
Show commands | |
show dhcp | |
show dhcp admin@node1.branch1# show dhcp mappings node node1 Wed 2021-06-30 11:39:30 UTC Retrieving from 'node1.branch1'... ================= ================== ====== ============== ================ ============= Src Device Port Dest Device Port VLAN Mapping Type IP Family Type Config Type ================= ================== ====== ============== ================ ============= 1 0 0 originating ipv4 client <<<<<<<<<<<<< Allocated by the SSR 3 250 0 originating ipv4 server 250 3 0 derived ipv4 server | |
Troubleshoot | |
show network-interface application | |
dhcp client or dhclientRelease and request
| |
DHCP did not start | show network-interface application name ge-0-2 dhcp did not start admin@node0.90ec7734d5b1# show network-interface application name ge-0-2 Wed 2023-08-30 10:54:56 UTC Retrieving network-interface application data... ========================================================================= Application Data ========================================================================= Interface: node0.90ec7734d5b1:ge-0-2 state: Application not running |
Solution | Reboot the SSR may be restart the DHCP process or disable / enable the dhcp interface ?? |