Service route SSR local to the Router

Configuration Attributes
------------------------
bridge-name               EOSVR bridge to forward packets to for the service.
enable-failover           Enable failover across next-hops and service-routes that have this flag set.
generated                 Indicates whether or not the Service Route was automatically generated as a result of STEP topology builder, Conductor,
                          BGP/SVR, or DHCP Relay services.
host                      Packets are passed to the host operating system for processing
name                      An arbitrary, unique name for the service route.
nat-target                The address or fqdn of the server that packets are forwarded to for the service. The destination is natted to this address.
next-hop                  An instance of the nexthop for the service route.
next-peer                 Peer router to forward packets to for the service.
peer                      Peer router to forward packets to for the service.
reachability-detection    Configure Reachability Detection
routing-stack             Packets are passed to the internal routing agent for processing
routing-stack-vrf         VRF in which the internal routing agent will receive the packets
service-name              The name of the service that this service route applies to.
service-route-policy      Service Route Policy that applies to the service route.
use-learned-routes        Use learned (from routing protocols), connected, and static routes.
vector                    Vector name to assign a cost to this service-route.

config

    authority

        router  branch1
            name           branch1

            service-route  to_internet_ServRoute
                name          to_internet_ServRoute
                service-name  to_internet

                next-hop      node1 mgmt
                    node-name  node1
                    interface  mgmt
                exit
            exit
        exit
    exit
exit