...
- Dual node high availability: where two nodes form one logical router, with shared state with a mgmt interface + a "fabric" backplane between them.
- VRRP option
- Shared physical interface ( w/without Redundancy group for Active/Standby , A?S does not need fabric interface )
- Dual router high availability: where two nodes form two logical routers, with no shared state. This is a familiar approach to administrators accustomed to deploying pairs of legacy routing platforms.
...
SSR HA configuration router of Node
| Configure node0 ( shared mac address, global id, sync interface, fabric-interface when needed ) | ||||||
| thenn clone node0 → to node1 | ||||||
Shared physical interface | ||||||
|---|---|---|---|---|---|---|
| New steps | 1. Start at step 7 and put the Device-interface's "shared physical addresses" = 00:00:00:00:00:0x on all interfaces on node1 2.Reset (clear out) all global ids on all the network interfaces on node 3. Clone node1 and name your clone node 4. Select combo for the node role and put ‘datacenter2’ for the assoc asset id 5. Validate and Commit | |||||
| Mac Address format: 00:00:00:00:00:01 00:00:00:00:00:02 | ||||||
| Step 2 | ||||||
Router > bosdc1 ADD next to Redundancy Groups
| ||||||
| ||||||
| Step 3 | on both nodes: node1 and node2 | |||||
| Add Device-interface |
| |||||
| Add network-interface |
| |||||
| Step 4 | ||||||
| ||||||
Copy the password 2- save the file on the local pc | ||||||
go to: https://proxy-10099.onramp.128technology.com/quick-start ( need to log in ) admin / 128Tadmin Upload the quickstart file ( + password ) | ||||||
Reboot both Datacenter Router 1 and Datacenter Router 2 | ||||||
| Step 5 | ||||||
show peers
| ||||||
Redundancy Group Priority:
Change the priority to 1 VALIDATE and COMMIT | ||||||
| switch from Node1 to Node2 |
|
...