Session Smart Router on AWS

1. Press "Continue to Subscribe".

2. The "Stack name" will be the name of the router in the configuration.

3. Select an existing VPC and EC2 KeyPair to allow SSH access.

4. This listing deploys a 128T Router with one interface in a public subnet and a second interface in a private subnet. In this step select existing public and private subnets.

5. Optionally, if using a 128T Conductor enter the primary node IP address, which appears as the "IPv4 Public IP" in the EC2 Dashboard. If the Conductor is HA, enter the secondary node IP address.

6. Select the instance type (c5.xlarge is selected by default), and select "Next".

7. In the "Configure stack options" step, none of the additional fields are required, so select "Next".

8. In the "Review" step, review the details, click acknowledgments, and select "Create stack".

9. During deployment the "Status" field starts with "CREATE_IN_PROGRESS" and after 1-2 minutes, the "Logical ID" with the stack name should have a status of "CREATE_COMPLETE".

10. Go to the "Outputs" tab and copy the "InstanceIPAddress" and use it to access the Router GUI from Google Chrome with URL "https://xxx.xxx.xxx.xxx".

11. Because the certificate is self-signed, you will have to accept the certificate. With Google Chrome, type "thisisunsafe".

12. When the login screen for the 128T GUI appears the default username is "admin" and the default password is the Instance ID.