Remote access IPsec Configureation

# Step 1. Configure User profile and IP Address Pool
set access address-assignment pool RA-NCP-pool family inet network 192.168.100.0/24
set access address-assignment pool RA-NCP-pool family inet xauth-attributes primary-dns 8.8.8.8

set access profile RA-NCP-Profile client NCP-user1 firewall-user password lab123
set access profile RA-NCP-Profile address-assignment pool RA-NCP-pool

# create st0 interface
set interface st0 unit 1 family inet 

# security zone allow ( ike not for st0 )
set security zone security-zone Untrust host-inbound traffic system-services ike
set security zone security-zone Untrust interfaces st0.1


# Step 2. Configure IPSec Phase 1

# Step 2. Configure IKE or IPSec Phase 1
# --------------------------------

set security ike proposal RA-NCP-IKE-Pro authentication-method pre-shared-keys
set security ike proposal RA-NCP-IKE-Pro dh-group group19
set security ike proposal RA-NCP-IKE-Pro authentication-algorithm sha-256
set security ike proposal RA-NCP-IKE-Pro encryption-algorithm aes-256-cbc
 
set security ike policy RA-NCP-IKE-Pol mode aggressive
set security ike policy RA-NCP-IKE-Pol proposals RA-NCP-IKE-Pro
set security ike policy RA-NCP-IKE-Pol pre-shared-key ascii-text juniper123
 
set security ike gateway RA-NCP-GW ike-policy RA-NCP-IKE-Pro
set security ike gateway RA-NCP-GW dynamic user-at-hostname "user@LB.net"
set security ike gateway RA-NCP-GW dynamic ike-user-type shared-ike-id
set security ike gateway RA-NCP-GW external-interface ge-0/0/2
set security ike gateway RA-NCP-GW aaa access-profile RA-NCP-Profile
set security ike gateway RA-NCP-GW version v1-only
 

# Step 3. Configure IPSec Phase 2
# --------------------------------

set security ipsec propocal RA-NCP-IPsec-Pro encryption-algorithm aes-256-gcm

set security ipsec policy RA-NCP-IPsec-Pol perfect-forwarding-secrecy keys group19
set security ipsec policy RA-NCP-IPsec-Pol proposal-set RA-NCP-IPsec-Pro

set security ipsec vpn RA-NCP-VPN bind-interface st0.1 
set security ipsec vpn RA-NCP-VPN ike gateway RA-NCP-GW
set security ipsec vpn RA-NCP-VPN ike ipsec-policy RA-NCP-IPsec-Pol
set security ipsec vpn RA-NCP-VPN traffic-selector RA-NCP-TS local-ip 0.0.0.0/0 remote-ip 0.0.0.0/0

# Step 5. Configure Security Policy
# --------------------------------
set security policies from-zone untrust to-zone Servers policy RA-NCP-Access match source-address any destination-address Server application any
set security policies from-zone untrust to-zone Servers policy RA-NCP-Access then permit