Skip to end of metadata
Go to start of metadata
| Exercise 1 | Deploy Dallas Branch Router |
|---|
|
|
| Step 1 | Configure Branch Router in Conductor |
|---|
|
|
|
|
| Step 2 | Create QuickStart File |
|---|
|
|
| Step 3 | Put QuickStart File on Branch 2 Router |
|---|
|
|
| Step 4 | Verify Connectivity |
|---|
|
|
|
|
| Exercise 2 | Routing With BGP |
|---|
|
|
| Step 1 | View Internet Router |
|---|
|
|
| Step 2 | Connect BGP Peers |
|---|
|
|
| |
| Step 3 | Advertise BGP Routes |
|---|
|
|
| |
| Step 4 | Redistribute Services into BGP |
|---|
|
|
| Step 5 | View Internet Router |
|---|
|
|
| show bgp summary show ip route bgp
internet-router# show bgp summary
IPv4 Unicast Summary:
BGP router identifier 192.168.7.101, local AS number 6000 vrf-id 0
BGP table version 6
RIB entries 11, using 1672 bytes of memory
Peers 3, using 62 KiB of memory
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd
1.1.1.128 4 100 24 24 0 0 0 00:09:12 0
2.2.2.128 4 200 21 21 0 0 0 00:07:58 0
3.3.3.128 4 300 30 30 0 0 0 00:12:20 3
Total number of neighbors 3
internet-router# show ip route bgp
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
B>* 128.128.128.1/32 [20/1000000] via 3.3.3.128, dc, 00:04:27
B>* 128.128.128.128/32 [20/1000000] via 3.3.3.128, dc, 00:04:27
B>* 172.26.128.0/30 [20/0] via 3.3.3.128, dc, 00:05:49
internet-router#
|
| Exercise 3 | Routing Filters and Policies |
|---|
|
|
| Step 1 | Add AS Path |
|---|
|
|
| show bgp
admin@node2.bosdc1# show bgp
Thu 2021-05-06 20:55:10 UTC
BGP table version is 12, local router ID is 3.3.3.128, vrf id 0
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 1.1.1.0/24 3.3.3.1 0 0 6000 i
*> 2.2.2.0/24 3.3.3.1 0 0 200 200 200 200 6000 i
*> 3.3.3.0/24 3.3.3.1 0 0 6000 i
*> 128.128.128.1/32 0.0.0.0 1000000 32768 ?
*> 128.128.128.128/32
0.0.0.0 1000000 32768 ?
*> 172.26.128.0/30 0.0.0.0 0 32768 i
Displayed 6 routes and 6 total paths
Completed in 0.16 seconds
admin@node2.bosdc1#
|
| Step 2 | Add Community String |
|---|
| 1- Create a Filter 2- Policy 2a- Condition 2b- Actions |
| SSR |
admin@node1.nycconductor1# show bgp router all 172.26.128.0
Thu 2021-05-06 21:05:58 UTC
WARNING: Targeting router 'all' may take a long time. Continue anyway? [y/N]: y
========
bosdc1
========
BGP routing table entry for 172.26.128.0/30
Paths: (1 available, best #1, table Default-IP-Routing-Table)
Advertised to non peer-group peers:
3.3.3.1
Local
0.0.0.0 from 0.0.0.0 (3.3.3.128)
Origin IGP, metric 0, localpref 100, weight 32768, valid, sourced, local, best
Community: 128:128
AddPath ID: RX 0, TX 11
Last update: Thu May 6 21:05:08 2021
|
| on FRR | show bgp ipv4 172.26.128.0/30
internet-router# show bgp ipv4 172.26.128.0/30
BGP routing table entry for 172.26.128.0/30
Paths: (1 available, best #1, table Default-IP-Routing-Table)
Advertised to non peer-group peers:
1.1.1.128 2.2.2.128 3.3.3.128
300
3.3.3.128 from 3.3.3.128 (3.3.3.128)
Origin IGP, metric 0, localpref 100, valid, external, best
Community: 128:128
AddPath ID: RX 0, TX 8
Last update: Thu May 6 21:05:29 2021
internet-router#
|
| Step 3 | Reject Community String |
|---|
| 1- Create a Filter: match-community 2- Policy 2a- Condition 2b- Actions |
|
|
| show bgp router dalbo2 show bgp router seabo1
admin@node1.nycconductor1# show bgp router dalbo2
Thu 2021-05-06 21:36:34 UTC
========
dalbo2
========
BGP table version is 9, local router ID is 2.2.2.128, vrf id 0
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 1.1.1.0/24 2.2.2.1 0 0 6000 i
*> 2.2.2.0/24 2.2.2.1 0 0 6000 i
*> 3.3.3.0/24 2.2.2.1 0 0 6000 i
*> 128.128.128.1/32 2.2.2.1 0 6000 300 ?
*> 128.128.128.128/32
2.2.2.1 0 6000 300 ?
Displayed 5 routes and 5 total paths
Completed in 0.12 seconds
admin@node1.nycconductor1# show bgp router seabo1
Thu 2021-05-06 21:36:47 UTC
========
seabo1
========
BGP table version is 8, local router ID is 1.1.1.128, vrf id 0
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 1.1.1.0/24 1.1.1.1 0 0 6000 i
*> 2.2.2.0/24 1.1.1.1 0 0 6000 i
*> 3.3.3.0/24 1.1.1.1 0 0 6000 i
*> 128.128.128.1/32 1.1.1.1 0 6000 300 ?
*> 128.128.128.128/32
1.1.1.1 0 6000 300 ?
*> 172.26.128.0/30 1.1.1.1 0 6000 300 i
Displayed 6 routes and 6 total paths
Completed in 0.12 seconds
admin@node1.nycconductor1#
|
| Exercise 4 | BGP Over SVR |
|---|
|
|
| Step 1 | Configure Routing Interface |
|---|
|
|
| Step 2 | Change Router Instance to Routing Interface |
|---|
|
|
| Step 3 | Add BGP Over SVR Peers |
|---|
|
|
| Step 4 | Add BGP Over SVR Peers |
|---|
|
|
| Step 5 | Verify BGP Over SVR |
|---|
|
|
