Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 9 Next »

Service:  Destination ( IP/protocol/port )

Tenant: Source ( Endpoint )

WayPoint = Public/WAN Interface IP@ + dual-NAT encapsulation

Traffic tunneled traffic =  NATed port of the end-user-traffic


Documentation:  https://docs.128technology.com/docs/intro_installation_aws

Diagram:  https://docs.google.com/drawings/d/1uYwO3YQgkphsh3P_adCB5EHJcPlNn4M6E-2ZUGT-LUw/edit


Pre-requisiteLink
1- VPC

2- 3x Subnets
  • Public subnet:   172.31.110.0/24
  • Private subnet:  172.31.120.0/24
  • Management subnet:  172.31.130.0/24







128 Technology Conductor

https://aws.amazon.com/marketplace/search?searchTerms=128+technology

1. Press "Continue to Subscribe".  then "Continue to Configuration" then "Continue to Launch"

2. The "Stack name" will be the name of the router in the configuration.

3. Select an existing VPC and EC2 KeyPair to allow SSH access.

4. This listing deploys a 128T Router with one interface in a public subnet and a second interface in a private subnet. In this step select existing public and private subnets.

5. Optionally, if using a 128T Conductor enter the primary node IP address, which appears as the "IPv4 Public IP" in the EC2 Dashboard. If the Conductor is HA, enter the secondary node IP address.

6. Select the instance type (c5.xlarge is selected by default), and select "Next".

7. In the "Configure stack options" step, none of the additional fields are required, so select "Next".

8. In the "Review" step, review the details, click acknowledgments, and select "Create stack".

9. During deployment the "Status" field starts with "CREATE_IN_PROGRESS" and after 1-2 minutes, the "Logical ID" with the stack name should have a status of "CREATE_COMPLETE".






128 Technology Router



go to the linkhttps://aws.amazon.com/marketplace/

Delivery Method

Region

Select : CloduFormation template 

Select:   US-West-2_Oregon ( or other )


Choose Action:  Lunch Cloud formation



From EC2   ( or from Website/Wizard )


"Create stack"
  • What Stack name do you want to give it? 
Provide it in the "Stack name" field.
  • What router name and node name
SSR-AWS1 and node1
  • Where do you want to deploy it? 
Select a VPC and select the public, private and management subnets within the VPC.
  • Which 128T Conductor is going to manage it?
Provide the IP address of the primary node of Conductor, and only if the Conductor is highly available then provide the IP address of the secondary node of Conductor.
  • Who is going to be the administrator? 
Select the IAM user key.




Security Group 

Select the existing one ( or Create New Based On Seller Settings ) 

e New Based On Seller Settings


Key Pair SettingsSelect an existing one ( or create + save  a new one )




https://44.234.39.99/dashboard

admin / 128Tadmin

admin / instance ID:  i-0489910xxxxxxxxx



if needed change the password

log as:  centos  // use the ssh .pem file

sudo passwd admin

change password
[centos@ip-172-31-110-107 ~]$ sudo passwd admin
Changing password for user admin.
New password:
Retype new password:
passwd: all authentication tokens updated successfully.
[centos@ip-172-31-110-107 ~]$

Onboard the Router into the Conductor

1- create a router on the Conductor

1- routerdc1


















  • No labels