https://docs.128technology.com/docs/config_EthoSVR/#configure-an-ethernet-over-svr-bridge
- Configure an Ethernet Over SVR Bridge
- Create a Service For Ethernet Over SVR
- Assign the Service Route
- Peer List
| EoSVR Bridge | |
|---|---|
| Device interface | promiscuous Mode: True |
| Network interface | VLAN: 13 Tenant: EoSVR IP address: branch: 169.245.0.1 and DC:169.245.0.2 |
| Under Interface | Create a Bridge: EoSVR-Bridge (same on both SSR ? ) Peer: router name and Network interface IP@ |
| Service for EoSVR | branch-to-dc |
List of router: Lanner1 ans Lanner2 | |
| UDP / 1281 | |
| IP address: 169.245.0.2 ( dc is the target ) | |
Security Policy: internal Service Policy: MPLS_then_mgmt Access Policy: EoSVR (tenant ) | |
| dc-to-branch | |
| List of router: Lanner1 ans Lanner2 | |
| UDP / 1281 | |
| IP address: 169.245.0.1 ( branch is the target ) | |
| Assign Service-route | At the Node level |
On Lanner1 | |
| On Lanner2 |  |