conductor nodes are always run as active/active
| create the hostname | |
| prepare both IP address | |
| need to be routable | |
| Conductor Name: xxxx | |
| Node Name | |
| |
| If installing the SSR software for the first time, a system reboot is required. | |
| On the GUI | |
| Device interface | mode no-forwarding |
| Network interface | type: fabric + IP address ( prefix length and GW ) |
| |
| Issue if not interface | no-forwarding |
| |
open 930/TCP and 4505-4506/TCP (used for salt) to allow a conductor to communicate to managed routers.
Open 443/TCP for the web UI, and 22/TCP for remote SSH
