Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 17 Current »


https://drive.mindmup.com/map/1Gn1OWFK1RJwIR-k0MZCYTqSb6OVWCink

https://docs.google.com/drawings/d/1f81VGjnIxUVEag2zfyLkXCEnBTkrtnvvmdnJoGI_T8c/edit






SNPA or Subnetwork Point of Attachmentdata link layer address used to identify a connection to a subnetwork, such as an Ethernet address


Packet or PDUs Protocol Data UnitLink

Type 1:  IS-IS hello (IIH) PDUs


Broadcast to discover the identity of neighboring IS-IS systems and to determine whether the neighbors are Level 1 or Level 2 intermediate systems

  • Priority ( for DIS election )
  • Area IDs
  • L1 Hello packet and
  • L2 Hello packet



Level 1: 01:80:C2:00:00:14

Level 2: 01:80:C2:00:00:15

Link-state PDUs

Contain information about the state of adjacencies to neighboring IS-IS systems.
Link-state PDUs are flooded periodically throughout an area.

on PtP links ack by CSNPs

Complete sequence number PDUs (CSNPs)Contain a complete list of all link-state PDUs in the IS-IS database.
Partial sequence number PDUs (PSNPs)Sent multicast by a receiver when it detects that it is missing a link-state PDU (when its link-state PDU database is out of date)


DIS Election on Broadcast & multi-accessptp the priority = 0

router with the higher priority 
>> Tie Highest SNPA or Mac@

Default priority: 64  [ 0 to 127 ]

Priority = 0 >> ineligible


Highest priority
priority tie >>> highest  SNAP or Mac@

No backup DIS in IS-IS
pseudo-node ( Bcst Network = router )on Broadcast & multi-access
all router adv a single link ( not all the adj ) to the pseudo-node


MetricLink

from 1 through 63, or from 1 through 16,777,215 (224 – 1)
Wide metrichttps://www.juniper.net/documentation/en_US/junos/topics/concept/isis-wide-metrics.html
Reference bandwidth

https://www.juniper.net/documentation/en_US/junos/topics/reference/configuration-statement/reference-bandwidth-edit-protocols-isis.html

cost = reference-bandwidth/bandwidth

if ref= 100G 
then for 100G link cost = 1 and
for 10G cost = 10 and
for 1G link cost =1











  • No labels