Upgrade QFX5100 with USB

Owned by Jean-luc KRIKER
Last updated: Mar 11, 2020





inserting the USB 
{master:0}
root@qfx5100-vc> ugen1.3: <Kingston> at usbus1
umass0: <Kingston DataTraveler 2.0, class 0/0, rev 2.00/1.10, addr 3> on usbus1
da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
da0: <Kingston DataTraveler 2.0 PMAP> Removable Direct Access SPC-4 SCSI device
da0: Serial Number 001BFC3653BCB220E91E9A1A
da0: 40.000MB/s transfers
da0: 14784MB (30277632 512 byte sectors)
da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE>
reboot or power cycle the QFX5100

  Press "ESC"   

or

root@qfx5100-vc> request system reboot usb
Reboot the system ? [yes,no] (no) yes

Second rebot ( Automatic ) 



default configuration applied

deactivate chassis auto-image-upgrade

set system host-name qfx5100-2
set interfaces vme unit 0 family inet address 172.30.95.17x/25
deactivate interfaces vme.0 family inet
set routing-options static route 172.16.0.0/12 next-hop 172.30.95.129
set routing-options static route 0.0.0.0/0 next-hop 172.30.95.129
set system name-server 8.8.8.8

set system services ssh root-login allow
set system services netconf ssh