https://docs.128technology.com/docs/config_dhcp/#basic-configuration
| Add New DHCP server service | |
|---|---|
| Host service | Network-interface > address Add Host Services
|
| DHCP server |
|
| Add Address Pool |
|
| PCLI | NTP check IP@ instead dhcp admin@node1.branch1# show config running authority router branch1 system
config authority router branch1 system ntp server 0.uk.pool.ntp.org ip-address 0.uk.pool.ntp.org
config
authority
router branch1
name branch1
system
ntp
server 0.uk.pool.ntp.org
ip-address 0.uk.pool.ntp.org
exit
exit
exit
exit
exit
exit
|
| Conductor | |
Operation: Router > Node > DHCP
| |
| |
| Show commands | |
| show dhcp | |
show dhcp admin@node1.branch1# show dhcp mappings node node1
Wed 2021-06-30 11:39:30 UTC
Retrieving from 'node1.branch1'...
================= ================== ====== ============== ================ =============
Src Device Port Dest Device Port VLAN Mapping Type IP Family Type Config Type
================= ================== ====== ============== ================ =============
1 0 0 originating ipv4 client <<<<<<<<<<<<< Allocated by the SSR
3 250 0 originating ipv4 server
250 3 0 derived ipv4 server
| |
| Troubleshoot | |
| show network-interface application | |
dhcp client or dhclientRelease and request
| |
