| New steps | 1. Start at step 7 and put the Device-interface's "shared physical addresses" = 00:00:00:00:00:0x on all interfaces on node1 2.Reset (clear out) all global ids on all the network interfaces on node 3. Clone node1 and name your clone node 4. Select combo for the node role and put ‘datacenter2’ for the assoc asset id 5. Validate and Commit |
| Mac Address format: 00:00:00:00:00:01 00:00:00:00:00:02 | |
| Step 2 | |
Router > bosdc1 ADD next to Redundancy Groups
| |
| |
| Step 3 | on both nodes: node1 and node2 |
| Add Device-interface |
|
| Add network-interface |
|
| Step 4 | |
| |
Copy the password 2- save the file on the local pc | |
go to: https://proxy-10099.onramp.128technology.com/quick-start ( need to log in ) admin / 128Tadmin Upload the quickstart file ( + password ) | |
Reboot both Datacenter Router 1 and Datacenter Router 2 | |
| Step 5 | |
show peers show peers dmin@node1.bosdc1# show peers Thu 2021-05-06 18:17:14 UTC ======== ======= =================== ============= ========= ============= ============= Peer Node Network Interface Destination Status Hostname Path MTU ======== ======= =================== ============= ========= ============= ============= seabo1 node1 mpls1 10.0.128.0 up unavailable unavailable seabo1 node1 wan1 1.1.1.128 up unavailable unavailable seabo1 node2 mpls1 10.0.128.0 standby unavailable unavailable seabo1 node2 wan1 1.1.1.128 standby unavailable unavailable Completed in 0.07 seconds admin@node1.bosdc1# | |
Redundancy Group Priority:
Change the priority to 1 VALIDATE and COMMIT | |
| switch from Node1 to Node2 |
|
