Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »

Two options for the service route:     

  • Local break out
  • Autogenerated ( learn from the other side another SSR )


service-routehttps://docs.128technology.com/docs/config_reference_guide/#service-route

bridge-name
generated
host
nat-target:   The target address for this service-route.  ???????????
next-hop
next-peer:    list of multiple peers ( like DC ssr )
peer:   like DC ssr
reachability-detection
routing-stack:   ??????
routing-stack-vrf:     ??????
service-name
service-route-policy:  Max session, session rate, packet replication,  water mark Low/High
use-learned-routes:  to also use the RiB ( by default, without SR, the ssr will use the RiB )




service-route  > host

This is used to direct packets to the host operating system of a specified node

>>> Local Linux host / Node!







service-route > next-hoplocal breakout

local breakout
config

    authority

        router  branch1
            name           branch1

            service-route  to_internet_ServRoute
                name          to_internet_ServRoute
                service-name  to_internet

                next-hop      node1 mgmt
                    node-name  node1
                    interface  mgmt
                exit
            exit
        exit
    exit
exit


service-route-policyhttps://docs.128technology.com/docs/config_reference_guide/#service-route-policy








  • No labels