/
L2 over 2 differents Leaf
L2 over 2 differents Leaf
Config on Commander | |
Change IP@ on the BMS2 | ip link set eth2 down ip addr add 192.168.100.11/24 dev eth2 ip link set eth2 up ip add show |
Leaf 1 | show vlan and ethernet-switching {master:0} root@Leaf1> show vlans Routing instance VLAN name Tag Interfaces default-switch bd-7 100 esi.1760* vtep.32769* vtep.32770* xe-0/0/3.0* default-switch cluster_infra 4001 xe-0/0/2.0* default-switch default 1 {master:0} root@Leaf1> show ethernet-switching table vlan-name bd-7 MAC flags (S - static MAC, D - dynamic MAC, L - locally learned, P - Persistent static SE - statistics enabled, NM - non configured MAC, R - remote PE MAC, O - ovsdb MAC) Ethernet switching table : 4 entries, 4 learned Routing instance : default-switch Vlan MAC MAC Logical Active name address flags interface source bd-7 00:00:5e:01:00:01 DR esi.1760 05:00:00:fc:00:00:00:00:07:00 bd-7 00:50:56:a2:44:b0 D xe-0/0/3.0 bd-7 02:05:86:71:12:00 D vtep.32769 10.255.0.1 bd-7 02:05:86:71:17:00 D vtep.32770 10.255.0.2 {master:0} root@Leaf1> |
Leaf 2 | show vlan and ethernet-switch {master:0} root@Leaf2> show vlans Routing instance VLAN name Tag Interfaces default-switch bd-7 100 esi.1751* vtep.32769* vtep.32770* vtep.32771* xe-0/0/2.0* default-switch default 1 root@Leaf2> show ethernet-switching table vlan-name bd-7 MAC flags (S - static MAC, D - dynamic MAC, L - locally learned, P - Persistent static SE - statistics enabled, NM - non configured MAC, R - remote PE MAC, O - ovsdb MAC) Ethernet switching table : 5 entries, 5 learned Routing instance : default-switch Vlan MAC MAC Logical Active name address flags interface source bd-7 00:00:5e:01:00:01 DR esi.1751 05:00:00:fc:00:00:00:00:07:00 bd-7 00:50:56:a2:44:b0 D vtep.32771 10.255.0.3 bd-7 00:50:56:a2:d3:ca D xe-0/0/2.0 bd-7 02:05:86:71:12:00 D vtep.32769 10.255.0.1 bd-7 02:05:86:71:17:00 D vtep.32770 10.255.0.2 |
, multiple selections available,
Related content
bridge-group and BVInterface
bridge-group and BVInterface
More like this
load balance between two spine
load balance between two spine
More like this
CRB explaination
CRB explaination
More like this
additional route in
additional route in
More like this
Two interface to the conductor mgmt network for failure scenario
Two interface to the conductor mgmt network for failure scenario
More like this
config on EX ( + routing-instance )
config on EX ( + routing-instance )
More like this